 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| LED - Lamp 15.11.2007 Radiation Infrared Type DDH Technology AlGaAs/AlGaAs ELD-880-595 rev. 05 Case 5 mm flat plastic case Description High-power, high-speed infrared LED, wide beam angle, housing with standoff leads 32,5 O5,4 O4,8 0,1 0,1 1,0 8,0 0,2 0,7 max 0,1 2,0 0,2 0,5 Anode 0,2 Note: Special packages without standoff available on request 2,5 Applications Optical communications, safety equipment, automation 1,25 0,2 1,0 1,5 0,5 Maximum Ratings Tamb = 25C, unless otherwise specified Parameter Forward current (DC) Peak forward current Power dissipation Operating temperature range Storage temperature range Junction temperature (tP 50 s, tP /T = 1/2) Test onditions Symbol IF IFM PD Tamb Tstg TJ Value 100 1000 180 -20 to +80 -40 to +100 100 Unit mA mA mW C C C Optical and Electrical Characteristics Tamb = 25C, unless otherwise specified Parameter Forward voltage Forward voltage Reverse voltage Radiant power Radiant power Radiant intensity Radiant intensity Peak wavelength Spectral bandwidth at 50% Viewing angle Switching time Test conditions IF = 20 mA IF = 100 mA IR = 10 A IF = 20 mA IF = 100 mA IF = 20 mA IF = 100 mA IF =100 mA IF =100 mA IF =100 mA IF =100 mA Symbol VF VF VR e e e e p 0.5 tr, tf 870 0.5 5 5 7 30 0.8 3.8 880 65 110 10 890 Min Typ 1.2 1.4 Max 1.4 Unit V V V mW mW mW/sr mW/sr nm nm deg. ns Note: All measurements carried out on EPIGAP equipment We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications.All operating parameters must be validated for each customer application by the customer. EPIGAP Optoelektronik GmbH, D-12555 Berlin, Kopenicker Str.325 b, Haus 201 1 of 3 Tel.: +49-30-6576 2543, Fax : +49-30-6576 2545 LED - Lamp 15.11.2007 ELD-880-595 rev. 05 We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications.All operating parameters must be validated for each customer application by the customer. EPIGAP Optoelektronik GmbH, D-12555 Berlin, Kopenicker Str.325 b, Haus 201 2 of 3 Tel.: +49-30-6576 2543, Fax : +49-30-6576 2545 LED - Lamp 15.11.2007 ELD-880-595 rev. 05 Remarks concerning optical radiation safety* Up to maximum forward current, at continuous operation, this LED may be classified as LED product Class 1 , according to standard IEC 60825-1:A2. Class 1 products are safe to eyes and skin under reasonably predictable conditions. This implicates a direct observation of the light beam by means of optical instruments. *Note: Safety classification of an optical component mainly depends on the intended application and the way the component is being used. Furthermore, all statements made to classification are based on calculations and are only valid for this LED "as it is", and at continuous operation. Using pulsed current or altering the light beam with additional optics may lead to different safety classifications. Therefore these remarks should be taken as recommendation and guideline only. LED Class 1 accord. DIN EN/IEC 60825-1:2001-11 We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications.All operating parameters must be validated for each customer application by the customer. EPIGAP Optoelektronik GmbH, D-12555 Berlin, Kopenicker Str.325 b, Haus 201 3 of 3 Tel.: +49-30-6576 2543, Fax : +49-30-6576 2545 |
Price & Availability of ELD-880-595
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |